French SUPERCAM instrument records audio from INGENUITY’s Fourth flight!

Available online :

On 1 May, the French-U.S. #SuperCam​ instrument on NASA’s Perseverance rover recorded for the first time on #Mars​ the sounds from the #Ingenuity​ helicopter during its fourth flight above Jezero Crater.

French SUPERCAM instrument records audio from INGENUITY's Fourth flight!
2:45 min
Research

10 May 2021

French SUPERCAM instrument records audio from INGENUITY’s Fourth flight!

Perseverance was parked 80 metres from the small rotorcraft, which rose to five metres and then hovered before flying downrange for 133 metres and returning to its take-off and landing spot. SuperCam’s science microphone, developed by ISAE-SUPAERO, recorded the sound from the helicopter’s whirring rotors during the flight. The sound registered 84 hertz, equivalent to a low E note on the piano or a bass voice type.
“This is a wonderful surprise for the science team!” said Naomi Murdoch, a research scientist with ISAESUPAERO who is studying the data captured by the microphone. “Testing in a Mars atmosphere simulator to design this instrument and our sound propagation theories led us to believe the microphone would find it very difficult to discern sounds from the helicopter. As Mars’ atmosphere is very tenuous, it really attenuates sounds. So we needed a bit of luck to pick up the helicopter from this range. We’re thrilled to have obtained this recording, which is going to be a gold mine for our understanding of the planet’s atmosphere.”
Developed jointly by ISAE-SUPAERO and a consortium of laboratories attached to the French national scientific research centre CNRS and partner laboratories, coordinated by CNES, SuperCam’s microphone is derived from a consumer model adapted to withstand the Martian environment. The microphone is pursuing three science and technology goals of the Mars 2020 mission:
Study the sounds generated by laser impacts on Martian rocks to better understand their surface mechanical properties.
- Seek to gain new insights into surface atmospheric phenomena such as wind turbulence, dust devils and wind interactions with the rover, and now with the helicopter.
- Analyse the sound signature of the rover’s movements, for example when it is using its robot arm, driving on flat or rugged terrain, and operating its pumps.
The microphone was first turned on a few hours after Perseverance’s landing, picking up the first sounds on Mars from atmospheric turbulence. It is used daily in combination with laser-induced breakdown spectroscopy (LIBS) to analyse the chemical make-up of Martian rocks.

NASA/JPL-Caltech/LANL/CNES/CNRS/ISAE-SUPAERO 2:45 min

Perseverance was parked 80 metres from the small rotorcraft, which rose to five metres and then hovered before flying downrange for 133 metres and returning to its take-off and landing spot. SuperCam’s science microphone, developed by ISAE-SUPAERO, recorded the sound from the helicopter’s whirring rotors during the flight. The sound registered 84 hertz, equivalent to a low E note on the piano or a bass voice type.

“This is a wonderful surprise for the science team!” said Naomi Murdoch, a research scientist with ISAESUPAERO who is studying the data captured by the microphone. “Testing in a Mars atmosphere simulator to design this instrument and our sound propagation theories led us to believe the microphone would find it very difficult to discern sounds from the helicopter. As Mars’ atmosphere is very tenuous, it really attenuates sounds. So we needed a bit of luck to pick up the helicopter from this range. We’re thrilled to have obtained this recording, which is going to be a gold mine for our understanding of the planet’s atmosphere.”

Developed jointly by ISAE-SUPAERO and a consortium of laboratories attached to the French national scientific research centre CNRS and partner laboratories, coordinated by CNES, SuperCam’s microphone is derived from a consumer model adapted to withstand the Martian environment. The microphone is pursuing three science and technology goals of the Mars 2020 mission:

Study the sounds generated by laser impacts on Martian rocks to better understand their surface mechanical properties.
- Seek to gain new insights into surface atmospheric phenomena such as wind turbulence, dust devils and wind interactions with the rover, and now with the helicopter.
- Analyse the sound signature of the rover’s movements, for example when it is using its robot arm, driving on flat or rugged terrain, and operating its pumps.

The microphone was first turned on a few hours after Perseverance’s landing, picking up the first sounds on Mars from atmospheric turbulence. It is used daily in combination with laser-induced breakdown spectroscopy (LIBS) to analyse the chemical make-up of Martian rocks.

Latest videos
AeroMAPS: an ISAE-SUPAERO reference tool for exploring the possible futures of aviation!
Research 1:27 min

AeroMAPS: an ISAE-SUPAERO reference tool for exploring the possible futures of aviation!

1:27 min
Research

16 May 2024

AeroMAPS: an ISAE-SUPAERO reference tool for exploring the possible futures of aviation! ISAE-SUPAERO / SapienSapienS

The AeroMAPS tool, developed by two ISAE-SUPAERO researchers, Scott Delbecq and Thomas Planès, can be used to assess the environmental impact of air transport and the effectiveness or limitations of levers for decarbonizing the sector.
Initially designed for research and training purposes, it now serves as a multidisciplinary platform for experts and decision-makers from institutions, industry, and associations. Its development has been integrated into the work of the Institute for Sustainable Aviation (ISA), a collaborative research institute initiated by Laurent joly, head of research for sustainable aviation, which aims to address the transition to #lowcarbon #aviation in all its complexity.
By playing on the sector’s transition levers, AeroMAPS users can define the scenarios whose impacts they wish to analyze. For example, the introduction of new aircraft types, the use of new fuels or the rate of growth in air traffic.
AeroMAPS is the first air transport scenario simulation platform built on an open-source scientific methodology. It was initially designed and developed to enable researchers to explore air transport transition scenarios in detail. It was soon integrated into training programs: first as part of the ISAE-SUPAERO engineering curriculum, then as part of continuing education programs.
To see the bigger picture, the two researchers added a socio-economic dimension to their tool (via a thesis conducted by Antoine Salgas, a doctoral student on the project, in partnership with Toulouse Business School), and subsequently, a traffic and emissions inventory, enabling the analyses made with AeroMAPS to be partitioned and regionalized: the AeroSCOPE tool, created as part of a collaboration with the Dutch university TU Delft.
Today, AeroMAPS’ comprehensive, multidisciplinary approach is a decision-making aid for the entire aeronautics ecosystem, as well as for institutional, industrial and association decision-makers. Through its scientific expertise, ISAE-SUPAERO contributes to the public debate on the place of aviation in our society!
Discover... the multidisciplinary test platform EMpEROR of ISAE-SUPAERO!
Research 2:29 min

Discover... the multidisciplinary test platform EMpEROR of ISAE-SUPAERO!

2:29 min
Research

2 March 2023

Discover... the multidisciplinary test platform EMpEROR of ISAE-SUPAERO! ISAE-SUPAERO / SapienSapienS

The EMpEROR platform was born on the one hand, from the increasing consideration of aeroelastic phenomena in modern aeronautics, and on the other hand, from the synergy between the Aerodynamics, Energetics, and Propulsion (DAEP) and Structural Mechanics and Materials (DMSM) departments.
This platform has been designed and thought out to allow great modularity of metrology, around a rotor bench allowing to rotate from 1 to 6 blades, up to 1 meter in diameter, from 0 to 3000 rpm, and this in complete safety thanks to a 6-meter-long protective cage. It is equipped with several sensors for performance measurements, but also with a rotating vibrometry system for measuring the dynamics of the blades (this system is only used by two laboratories in Europe). The bench also makes it possible to embed measurement systems in the blades, but also in the coming months, systems to control these unstable phenomena.
Since 2020, this platform has also enabled two thesis students to work on aeroelastic phenomena, as well as 6 Master’s students. This platform also makes it possible to generate experimental databases used by ISAE-SUPAERO researchers to compare and validate their computer codes.
The equipment will increase in power in 2024 with the addition of the possibility of making Laser measurements, of the PIV or/and LDV type, as well as the possibility of manufacturing more complex blades with the hand on the flexibility of these.
For full functionality of this site it is necessary to enable JavaScript. Here are the instructions how to enable JavaScript in your web browser.
Choose an RSS feed
The entire RSS feed
RSS Feed by theme
Campus Academic programs Institute International Diversity program Research Companies Sustainable Development Innovation DEOS Alumni Doctorat DCAS Ingénieur DMSM Mastère Spécialisé DISC LACS Apprentissage Evénement DAEP